Cleanmed Suction

Can be used on wet line, dry line and semi wet/dry line suction systems.

For the daily cleaning and maintenance of dental aspirator systems.

• Chlorine, Aldehyde and Phenol free;
• Alkaline-based solution;
• Non-foaming and non-abrasive;
• Easy and accurate dosage system for different % solution;
• Effective also for the spittoon bowl

Suction systems are continually exposed to pathogenic agents and represents an hazard to dental staff and patients and to the functionality of suction system. The cleanliness and disinfection should take place frequently, at least once a day or every time a surgery ends. The disinfectants should be material compatible to avoid damages to the system. For instance, chlorine-based disinfectants will cause corrosion of the suction system. BMS products are specifically formulated to be material compatible with a broad efficacy spectrum to preserve continual system functionality and cleanliness.

Effective Spectrum

Bactericidal, Yeastcidal, Virucidal, Fungicidal, Tubercolicidal

Directions for Use:

• Dispense 2% solution 50ml aspirator cleaner and disinfectant daily to 950ml warm water. Aspirate via the high and low volume suction tubes and also dispense into the spittoon bowl.
• Leave for a minimum of 10 minutes in order to activate the working properties and then rinse thoroughly with clean water.

• Composition: Polyaminopropyl biguanide less than 5% nonionic surfactant, EDTA, disinfectants.